Installing to a USB Flash Drive-de
From DSL Wiki
This page in other languages: Español, 中文版 (chinese)
Contents |
Before going any further
Save all of your data on your USB to another storage medium, such as a CD/DVD or hard drive..
Requirements
USB Drive at least 128 MB in size. 512 MB or more is preferable. 64 MB will work, but won't leave much space for customization.
From within DSL
Some things have changed since this page was originally written. Since then, an easy (and working) method to install DSL to a USB flash drive is available from within the DSL LiveCD main menu. Simply open the Main menu, go to Apps then Tools and select either a USBZIP or USBHDD and follow the prompts. See the page at USB Booting for more information.
From within Linux
- Begin by determining the location of your flash drive. It will be something like /dev/sda
fdisk -l
- Check your syslinux version and upgrade it if you want FAT32 support. (Syslinux 2.11 works for FAT16; Syslinux 3.35 works for FAT32) Compile & install the latest syslinux from http://www.kernel.org/pub/linux/utils/boot/syslinux/ ( in the EU go to http://www.eu.kernel.org/pub/linux/utils/boot/syslinux/)
- If you need to wipe the MBR on the Flash Disk, do it with a command like below. This shouldn't be necessary unless there's another funky bootloader in the MBR (like, if you were experimenting with another bootable USB linux distro).
BE *VERY* CAREFUL NOT TO WIPE YOUR HARD DRIVE'S MBR HERE!!! Replace sdX with the path to your USB drive
dd if=/dev/zero of=/dev/sdX bs=512 count=1
Then install http://ms-sys.sourceforge.net/ and put another MBR in its place:
ms-sys -s /dev/sdX
OR, Another way to put MBR in its place is using 'mbr.bin' 512 bytes file from the Syslinux package:
locate mbr.bin cat /somepath/share/syslinux/mbr.bin > /dev/sdX
- Run fdisk on /dev/sdX, so it looks like this:
Device Boot Start End Blocks Id System /dev/sdX1 * 1 1021 253177 b W95 FAT32
Use d to delete existing partitions until none remain. Use n,p,1 to create a new primary partition. Use a to make it bootable. Use t,b to make it W95 FAT32. Don't forget to hit 'a' to make it bootable!
Use 'w' to save the changes and exit
- Download the dsl-embedded zipfile
- Create a FAT16 or FAT32 partition on the pendrive: ("-F 32" will create a FAT32 partition; "-F 16" will make a FAT16 one)
mkfs.vfat -F 32 /dev/sdX1
- Mount the pendrive & unzip the dsl-embedded.zip file onto this.
- Unmount the pendrive
- Next use syslinux to make it bootable.
syslinux -s /dev/sdX1
- You can now boot via QEMU (from within Linux or windows), OR as native from the USB drive.
- You can also run DSL from a GRUB bootloader menu on your USB key. This is very useful if you're using DSL as part of a data/system rescue toolkit, as you can include multiple preset configurations of DSL as well as other utilities.
Note: syslinux needs the package "mcopy" included in the package "mtools".
Note: Unfortunately, this method does NOT give a 50MB Linux Distribution because qemu dir and method is (comparatively) big. You will end up with a 110MB distribution.
Note: The iocharset=utf8 option when mounting the USB stick may result in the "KNOPPIX/KNOPPIX" not being found upon booting.
Alternative I: Using GRUB as boot loader
Note: This method has been reported not to work under certain conditions
- Download the current ".iso" dsl-cd image.
- Create an ext2 partition (=> 51MB) on pendrive. Mount it.
mke2fs -v -L "DSL" /dev/<device> mkdir -p /tmp/pendrive mount /dev/<device> /tmp/pendrive/
where <device> is the corresponding file which represents your USB storage device/partition.
Note: ext3 is ok too.
- Change to the directory where you mounted the ext2 partition, install GRUB boot loader:
cd /tmp/pendrive/ grub-install --no-floppy --root-directory=. /dev/<device>
Note: Replace <device> with the corresponding file which represents your USB storage device/partition. For example /dev/sdc1
Note 2: This method did not work for me, I used the manual method of running grub and entered "root (hd1,1)" and "setup (hd1)" (your paths will probably vary).
- Copy the contents of the cd image to the usb drive.
mkdir /tmp/dsl-cd mount [/path_to/]current.iso /tmp/dsl-cd/ -o loop cp -vR /tmp/dsl-cd/* /tmp/pendrive/
- While in the same directory - where you mounted the ext2 filesystem - create a menu.lst file for grub in the directory ./boot/grub/menu.lst
cat > /tmp/pendrive/boot/grub/menu.lst << EOF title Damn Small Linux root (hd0,0) kernel /boot/isolinux/linux24 root=/dev/sda1 ro lang=us toram noeject frugal initrd /boot/isolinux/minirt24.gz boot EOF
Note: You might have to change (hd0,0) to the correct partition for your USB drive. However, the default should work on most systems.
- Unmount the filesystem.
- You can now boot from your USB storage device.
Alternative II: Using GRUB as boot loader
Someone found the above process doesn't work and has documented for others this working process
The Situation:
- Running SLED 10 (Suse)
- The USB key is a 1GB and appears as /dev/sda
- Logged in as root
- The DSL ISO is downloaded to /root/Desktop/dsl-3.3.iso
- Two partitions, the first to use as general USB storage, the second for DSL
- The DSL partition wanted to be ext3 so that Windows doesn't mess it up
- The first partition needs to be the big storage one as Windows doesn't like addressing the second partition on flash drives
The procedure:
- fdisk /dev/sda
- d - Delete all partitions on the key
- n - Make a partition
- p - Primary partition for general storage
- 1 - First partition
- 1 - From the first block
- 948 - Most of the space, about 933MB
- n - Make a partition
- p - Primary partition for DSL
- 2 - Second partition
- 949 - Start from the next available sector
- 1012 - To the end of the disk. I give it 64MB
- a - Make the partition bootable
- 2 - Mark the DSL partition bootable
- t - Change the partition type
- 1 - Change partition 1
- b - Change it to Win95 FAT32
- w - Write the changes
- fdisk -l - Gives the following output:
Device Boot Start End Blocks Id System
/dev/sda1 1 948 954131+ b W95 FAT32
/dev/sda2 * 949 1012 64416 83 Linux
Your flash drive should now look like this
- mkdir /mnt/iso
- mkdir /mnt/usb
- mount -o loop /root/Desktop/dsl-3.3.iso /mnt/iso
- mke2fs /dev/sda2
Note: If you want to have an ext3 filesystem, add the -j flag: mke2fs -j /dev/sda2
- mount /dev/sda2 /mnt/usb/
- cd /mnt/iso
- tar cvf - . | (cd /mnt/usb; tar xvf - )
- mkdir /mnt/usb/boot/grub
- cp /boot/grub/*stage* /mnt/usb/boot/grub/
- cat > /mnt/usb/boot/grub/menu.lst << EOF
title Damn Small Linux root (hd0,1) kernel /boot/isolinux/linux24 root=/dev/sda2 ro lang=us toram noeject frugal initrd /boot/isolinux/minirt24.gz boot EOF
- cd /mnt/usb/
- grub-install --no-floppy --root-directory=. /dev/sda
- cd /root
- umount /mnt/usb
- umount /mnt/iso
- rm -r /mnt/iso
- rm -r /mnt/usb
From within Windows
- Note: This guide assumes that your USB Flash Drive is "F:". Please replace "F" with the correct drive letter.
There are two methods. For either method, you will need:
- A USB flash drive (also called flash disk, pendrive, USB stick...)
- Download "dsl-embedded.zip" from http://www.damnsmalllinux.org/download.html (49Mb - The Torrent is recommended, and is often the fastest)
Method I
- Format your flash drive, from cmd.exe (the "DOS" window) type:
FORMAT F: /fs:FAT32
- Unzip "dsl-embedded.zip" to your flash drive (you could use the "Extract all files" built into XP with the destination as "F:\")
- Download "syslinux-3.63.zip" from Syslinux - Syslinux can also be used by various other platforms, such as Unix.
- Go to a command prompt and run syslinux for your drive from \win32\syslinux.exe typing:SYSLINUX -ma F:
- If you are running Windows Vista, remember to start cmd.exe as Administrator, otherwise the normal cmd.exe won't be able to access the MBR of your USB drive.
- reboot.
FORMAT F: /fs:FATmay allow DSL to boot.
(**) YMMV. Some report this does not work. Some report it does:
- (Tested 9/27/07 on Hp T5515 thinclient, worked without issue. Generic 512mb drive, fat32, DSL embedded 3.4.3)
- (Tested 10/16/07 on Custom built dual core PC, Worked Without issue. Adata JOGr 2 gig drive, FAT32, DSL embedded 3.4.4)
- (Tested 11/25/07 on Asus EEEpc, worked without issue. Generic 128MB drive, FAT32, DSL embedded 4.0)
- (Tested 12/12/07 on Memorex Traveldrive, worked without issue. 1GB drive, FAT32)
- Starts booting but stops showing an insmod error (?) on Packard Bell Easynote XS20-005, booted from a Apacer Handy Steno AH123 (1Gb, FAT32) with dsl-4.2.5-embedded, boot parameter "dsl vga=normal", xvesa 800x600x32.
- Doesnt boot from generic 256Mb usb stick on Packard Bell Easynote XS20-005, tried both FAT and FAT32
- (Tested 4/22/08 on Dell Inspiron 600m using 1GB Sandisk Cruzer, DSL Embedded 4.2.5 FAT32 - worked without issue)
Method II
NOTE: HP USB Key Utility setup will only run on vista if you run the installation in compatibility mode. To apply this, rightclick on the installation file and go to "Properties". Open the tab "Compatibility" and choose "Windows XP Service Pack 2". Apply and then it's working on vista too. Note: You don't need to run the installed program in this mode.
For this method, you will need "HP USB Key Utility for Windows", from http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&mode=3&taskId=135&swItem=MTX-UNITY-I23839
- Install "HP USB Key Utility for Windows"
- Plug in the flash disk and let windows find it (check the letter assigned to your flash disk e.g. F:)
- Run Start Menu-> Programs -> HP System Tools -> HP Drive Key Boot Utility
- On Welcome Screen - click Next
- Select your flash drive letter (in my case F:) - click Next
- Choose Create New or Replace Existing Configuration - click Next
- Choose Hard Drive - click Next
- Choose Create New Filesystem - click Next
- Wait until the drive is formated...
- Choose HP Firmware Flash Package - click Next, click Finish.
- Now extract the content of the dsl-embedded.zip file directly onto your flash disk (F: in my case) overwriting all files(!!).
- Done! Your DamnSmallLinux on USB is ready :-) Reboot and try it!!
NOTE: This method did not work for me using DSL v3.3 with a Sandisk Cruzer Titanium USB drive.
User Tested: This method worked perfectly using HP Utility and dsl-4.2.1-embedded.zip
Convert .iso to USB installation
With the guide from [1] you can install the .iso contents non-destructively onto a USB partition. Leave out all the partitioning or formating stuff to prepare an existing and used USB drive for DSL booting:
Note: All path names are examples! Please adapt or you may corrupt existing partitions or files.
- Mount USB drive, with e.g. mount /dev/sdx1 /flash - can be either FAT16 or FAT32!
- Mount ISO image, with e.g. mount /tmp/dsl-3.2.iso /tmp/iso -o loop
- Copy all contents from ISO to USB drive: cp -vr /tmp/iso/* /flash/
- Rename and move syslinux files to root directory: mv /flash/boot/isolinux/* /flash/
- Rename isolinux.cfg: mv /flash/isolinux.cfg /flash/syslinux.cfg
- Unmount USB drive: umount /flash
- Install syslinux: syslinux /dev/sdx1 and eventually set the MBR boot flag for this partition (with fdisk).
Questions
- Why is it that DSL installed on USB disk won't finish booting after conversion from .iso?
- It appears that KNOPPIX file is hard-wired to seek for CD-ROM and not USB drive. Use embedded version.
- Why does the from-within-Linux method require FAT16, but the Windows method work with FAT32? Could I just leave and reuse an existing FAT32 USB partition using the Linux syslinux version?
- Either method should work however, as per previous notes, using FAT might provide better results than FAT32.
- Syslinux is the key reason for FAT16 vs. FAT32... CentOS 4.4 (which is essentially Red Hat ES4) comes with syslinux 2.11 which does not support FAT32. Syslinux 3.35 (the latest, as of this writing) works with FAT32 just fine.
- Why my keyboard and usb mouse do not work when I entered X windows?
- Try to enable 'usb device emulation legacy' entry in your bios setup.
Modifications for v 3.2 Embedded
After installation I added autorun.inf penguin.ico /USB /tightvnc
Trying to run the dsl-linux.sh in my distro did not work I had to modify the file (it was setup for a second drive and qemu did not exist in the download)
Here are some configuration settings that I found I had to modify after the installation. I also created an autorun.inf that works flawlessly with this. The autorun.inf file is also configured for use of TightVNC if the folder tightvnc is created at the root of the drive. I also created a context link to the folder USB.
- autorun.inf
[autorun] icon=penguin.ico label=Damn Small Linux open=dsl-base.bat action=Run Damn Small Linux in qemu shell\vncviewer\command=tightvnc\vncviewer.exe shell\vncviewer=Run the VNC Viewer Application shell\tightvnc\command=tightvnc\tightvnc-1.2.9-setup.exe shell\tightvnc=Run the TightVNC Server Installation shell\usbfolder\command="explorer.exe USB\" shell\usbfolder=Open the USB folder in Windows Explorer
This next file I modified and paired up with the windows equivalent so you do not have to answer the questions every boot. Some people might find the -m 256 beyond and should change as needed.
- dsl-linux.sh
qemu/qemu -L qemu/ -no-kqemu -soundhw sb16 -m 256 -localtime \
-kernel linux24 -initrd minirt24.gz -hda KNOPPIX/KNOPPIX \
-append "qemu vga=791 quiet noscsi nousb nofirewire atapicd noideraid \
noacpi acpi=off noapm noagp ide1=noprobe ide2=noprobe nomce frugal"
You must also download qemu and copy these files to the qemu dir on the usb drive.
- qemu
- qemu-img
- qemu-i386
If you wish to use the rest of the context menu I've created, download the TightVNC installer, vncviewer and put them in a \tightvnc.
At this point I made all of the damn small linux files hidden and hid the TightVNC, USB folders. Its a low level of security but works nicely. To use anything you just right click the drive in My Computer.
