wlan problems with laptop undockedForum: Laptops Topic: wlan problems with laptop undocked started by: yrogerg64 Posted by yrogerg64 on Oct. 05 2007,02:20
Greetings all and I hope someone can help with one...Toshiba Portege 7010ct with docking station with a DSL 3.4 Frugal install. The Ehome 103 wireless usb works fine with ndiswrapper, however when I shutdown, undock the laptop and reboot, the usb wireless adapter is no longer recognized when I plug it in. lsusb shows the following when docked: Bus 001 Device 004: ID 07d1:3c05 D-Link System Undocked with the usb plugged in: Bus 001 Device 001: ID 0000:0000 I might add that the usb ports are also built into the docking station. The usb port on the laptop is not available when the unit is docked. I'm still somewhat of a noob to Linux so if any of the members have any ideas, it would be greatly appreciated. It would be nice to have wireless connectivity when undocked with this machine. DSL has brought this old box back to life (like lightning when I run toram).. Posted by curaga on Oct. 05 2007,14:57
If the laptop's own usb ports cannot be used while docked, that sounds like some of the usb hardware is in the dock..You could check the bios if there's any option related to this. If it's a hardware limitation, it cannot be solved in software.. Posted by chaostic on Oct. 05 2007,15:45
I'm thinking he means physically blocked or unavalible. What does lsmod say about the usb adaptor/chip itself. Does the dock have USB2 or 1.1? What about the laptop? Can you plug in a flash drive or usb mouse and have that work outside of the dock? Or can you plug in a powered usb hub (not the dock) and then plug in the ehome adaptor to the powered hub? Posted by yrogerg64 on Oct. 05 2007,19:36
You are correct, the usb to the laptop is physically blocked by the docking station. Undocked, the laptop does recognize my flash usb and I can mount the file system. However when undocked, lsusb is not seeing the chip version of the wireless-usb like it does when the laptop is docked. lsmod yields the following while the laptop is undocked and the usb-wireless is plugged in:Module Size Used by Not tainted soundcore 3428 0 (autoclean) mousedev 3832 0 hid 22372 0 (unused) input 3168 0 [mousedev hid] unionfs 68800 7 nls_iso8859-1 2844 1 (autoclean) nls_cp437 4348 1 (autoclean) serial 52100 0 (autoclean) usb-uhci 21868 0 (unused) usbcore 57824 1 [hid usb-uhci] ds 6536 2 yenta_socket 9504 2 pcmcia_core 39840 0 [ds yenta_socket] thermal 6564 0 (unused) processor 8976 0 [thermal] fan 1568 0 (unused) button 2508 0 (unused) battery 5888 0 (unused) ac 1824 0 (unused) rtc 7036 0 (autoclean) cloop 8740 2 ide-cd 28512 0 ide-scsi 8816 0 of course I have not yet activated ndiswrapper here. So after activating ndiswrapper, and running iwconfig wlan0 essid for my network: error for wireless request "set ESSID" (8b1A) : SET failed on devive wlan0 ; No such device. When the laptop is docked and I modprobe ndiswrapper, wlan0 is assigned, but it appears when the laptop is undocked, ndiswrapper is not receiving the device id and therefore cannot assign a wlan id. On the bios side, the only relevant sections I have been able to find are: usb legacy emulation= disabled/enabled (tried both ways) device config= all devices/setup by os (again tried both ways) As far as I know, both the laptop and the docking port are usb 1.1 Could this possible be an issue with hotplug? Thanks again for the input. Posted by chaostic on Oct. 06 2007,04:45
Do you have a powered hub you can try out?
|